홈 >
철근 케이지 철근 롤링 용접기
철근 케이지 철근 케이지 직경 200-1250mm 300-1500mm 400-2000mm 400-2500mm 철근 케이지 중량 3000kg 4500kg 6000kg 8000kg
철근 케이지
철근 케이지 직경 200-1250mm 300-1500mm 400-2000mm 400-2500mm
철근케이지 중량 3000kg 4500kg 6000kg 8000kg
철근 케이지 길이 2-12m 필요에 따라 27m까지 연장 가능
디스크 리브 지름 5-16
힘줄을 감는 간격 50-500mm
주근 직경 12-40mm
유압 스테이션 유량 및 압력 10MPa
Quick Answer
This page introduces a cold rolled ribbed bar machine or related rebar processing machine for steel bar producers, mesh factories and construction material manufacturers. Share your raw material diameter, required finished bar diameter, target capacity, voltage and workshop conditions to receive a suitable machine configuration and quotation.
Machine at a Glance
| Product | 철근 케이지 철근 롤링 용접기 |
|---|---|
| Manufacturer | Cangzhou Jintongcheng Machinery Co., Ltd |
| Machine Type | Cold rolling and rib forming equipment |
| Application | 철근 케이지 철근 케이지 직경 200-1250mm 300-1500mm 400-2000mm 400-2500mm 철근 케이지 중량 3000kg 4500kg 6000kg 8000kg |
| Model | Contact us for configuration |
| Raw Material | Contact us for configuration |
| Input Diameter | Contact us for configuration |
| Finished Diameter | Contact us for configuration |
| Production Speed | Contact us for configuration |
| Capacity | Contact us for configuration |
Applications
- Construction reinforcement bar production
- Welded wire mesh factories
- Steel processing plants
- Building material manufacturers
- Rebar processing centers
- Steel distributors
- Precast concrete factories
How the Production Line Works
- Raw wire or steel bar preparation
- Descaling and lubrication according to line configuration
- Cold rolling and rib forming
- Straightening, cutting or coiling according to the required finished product
- Finished ribbed bar inspection and bundling
Production Line Configuration
Contact us for configuration. Common modules may include descaling, rolling mill, rib forming, PLC control, straightening, cutting, coiling and cooling systems depending on the ordered machine.
Technical & Buying Questions
What is this machine?
This machine is used to cold roll, rib, straighten, cut or coil steel bar or wire for construction reinforcement and mesh production. The exact output range depends on the selected configuration and tooling.
Who is this machine for?
It is designed for steel bar producers, welded mesh factories, construction material manufacturers, steel processing plants, rebar processing centers and equipment distributors.
How to choose the machine?
Choose by raw material diameter, finished diameter, two-rib or three-rib profile, target capacity, local voltage, workshop dimensions, straight bar or coil output, automation level and after-sales requirements.
Get Machine Configuration & Quote
Send your production requirement and an engineer will suggest a suitable configuration.
Chat with Engineer